供应双光透镜Q5电机电磁铁

DC12V/0.9A-1.88A

性能优劣：

1. 电磁铁铁芯耐磨，撞击性好，长年使用顶部无损

2. 铁芯活动灵活，反应速度快            

3. 电磁铁的线轴采用美国杜邦材料耐高温耐磨损

4. 电磁铁温升50～100℃其吸力仍稳定安全可靠

5. 电磁铁温升50～100℃其弹簧弹力仍稳定。

6. 电磁铁的铁芯不用油浸，使用寿命更长

7. 电磁铁的铁芯运行定位精准

8. 高频运行时铁芯活动稳定，无抖晃现象

9. 耐高压可达到1500V～1800V/2MA左右

10. 电磁铁的线圈是采用德国漆包线绕制而成。

11. 电磁铁的线圈导电性好、耗电少、发热量低、耐温180℃、最高可达210℃。

12. 制作电磁铁使用的所有材料采均采用环保处理，无毒，无污染，安全可靠。

13. 铁芯采用特殊工艺制成。耐磨、撞击性好，长年使用顶部无磨损。

14. 保持式电磁铁采用优质磁铁，磁铁吸力稳定，安全可靠

15. 电磁铁支架正常运行100万次以上不脱落

16. 电磁铁在合理环境中，寿命可以长达5年以上

     全部材料采用耐高温250度以上的，半数以上采用进口材料。

     行程：7mm

     Stayed electromagnet. Used to mobilizethedistance light lens.
DC12V/0.9A-1.88A
Performance advantages and disadvantages:
An electromagnet core abrasion, impact resistance, used formanyyears at the top of lossless
2 core activities flexible, fast response
3 solenoid spool using DuPont high temperaturewear-resistantmaterial
4 electromagnet 50 ~ 100 ℃ temperature remains stable and securethesuction
5 electromagnet temperature 50 ~ 100 ℃ which the springforceremains stable.
6 electromagnet core without oil, longer life
7 electromagnet core running precise positioning
8 core activities running high stability, noflutterphenomenon
9 high pressure up to about 1500V ~ 1800V/2MA
10 solenoid coils are made of enameled wire used in Germany.
11 solenoid coils good conductivity, low power consumption,lowheat, temperature 180 ℃, up to 210 ℃.
12 All materials used in making electromagnets areenvironmentallyfriendly mining process, non-toxic, non-polluting,safe andreliable.
13 core is made using a special process. Abrasion,impactresistance, used for many years at the top no wear.
14 Keep Solenoid high quality magnets, magnet suction stable,secureand reliable
15 solenoid bracket than 100 million times normal operation doesnotfall off
16 electromagnet in a reasonable environment, life can be up to5years
      All materials with high temperature of250degrees or more, more than half of imported materials.
      Stroke: 7mm