供应【JSZV1-10R电压互感器】

一. 概述(Description)

本型电压互感器为户内式环氧树脂浇注全封闭式产品，适用于额定频率50Hz或60Hz、额定电压10kV及以下的电力系统中作电压、电能测量和继电保护用。产品符合IEC60044-2:1997及GB1207-1997《电压互感器》标准。

The voltage transformer of the type JDZ(X)R8-10 is casting resin and fully enclosed indoor product. It is used for metering voltage and electric energy, relay protection in the electric system of rated frequency 50Hz or 60Hz and rated voltage 10kV. The transformer can be executed according to the standards IEC60044-2:1997 and GB1207-1997《Voltage transformer》.



二. 型号含义(Type designation)


三. 结构简介(Construction)

本型电压互感器为全封闭产品。一次带有熔断器保护。熔断器装在互感器内部。一、二次绕组和铁芯均浇注在环氧树脂内，绝缘性能优良，耐潮湿。二次绕组中还带有110,220V输出电压端子供操作机构作电源。 

The voltage transformers are fully enclosed products. The primaries of the products are protected 

with fused. The fused is installed inside the transformer. Primary and secondary windings and iron core are insulated by epoxy resin. It has a good ability of insulation and moisture proof. The secondary winding offering the 110,220V voltage is used for power supply to operation machine.





四. 技术参数(Technical date)

1. 配用熔断器为XRNP□-12型，0.2A，50kA。（特殊要求请在订货时注明）(The fusible cutout’s type is XRNP□-12，0.2A，50kA (If special need, please notice when order ))

2. 局部放电水平符合GB1207-1997《电压互感器》标准。(The conditions of the partial discharge test are in accord with the standard GB1207-1997《Voltage transformer》with be fulfilled without exception.

3. 其他技术参数见表 (Other technical data see form)